Useful tips for an excellent live streaming.
1. Stream Test
When you have an important event scheduled on your channel, make sure everything will work properly by stream testing it in advance. We recommend you to begin testing it a week or two prior to the scheduled event.
2. Replicate the entire event
Test the entire event with at least a day before the actual live streaming one. This means that you should replicate your event starting with the length of the representation, place, etc. You should test the cameras and the sound, test all the resolutions and the bit rates that you intend to use. See if there any interlaces, or sound differences and try to adjust them before the main event.
3. Use a hard-wired internet connection
If you want your broadcasting to run effectively you need to have a good internet connection with at least 1.5 Mbps consistent upstream bandwidth. This connection should be dedicated only to your live stream.
4. Check your network
Test using the same networks and ISPs that will be used for the live event. Test under the same network load that is expected during the event.
5. Follow our recommended live settings
Check that you are following our recommended live encoding settings. They were made by experts and you should follow them so that your live streaming worked properly.
6. Disable your firewall
Before starting your live broadcasting you should make sure that you have a wide-open connection to the Internet.
7. Set your resolution properly
Make sure you make the proper settings when you change the resolution of your video.
- 360p – 640×360 pixels
- 480p – 640 × 480 pixels
- 720 – 1280×720 pixels
- 1080 – 1920×1080 pixels
8. Turn off your antivirus protection
In some cases your antivirus may slower your live streaming event. It is best to disable it for the actual broadcasting.
9. Close other applications
While you are live streaming it is recommended to close other running programs, especially the ones you use to download/upload data.
10. Local record
We highly recommend you to save the live stream in your computer. This will ensure that even when you experience any network issues, the complete file will be archived. You can then upload the complete local recording to the platform.
Important: do not change the video source during a broadcast that is recorded (autorecord or DVR), otherwise unexpected results and even corrupted videos may be experienced.